Single Rotary Tablet Compression Machine

Single Rotary Tabletting Machine

• In Single Rotary Machine top half of the machine is with S.S. hood and acrylic covers and lower half of the machine complete with mat finished S.S. Covers. This reduces the noise level and to & fro flow of dust between compression zone and M/c room.

• A single sided rotary press consists of a die table producing single tablet per station for each revolution.

• No foundation require due to anti vibration mounting.

• Turret is made of highly ductile SG Iron casting.

• Large paint free compression zone with plenty of space for ease of cleaning & accessibility of components.

• Electronic total output counter is provided on the control panel.

• It is easy to operate and maintain the machine.

• Higher Turret speed gives higher output than standard machine.

• Friction plate on cam plate to minimize wear & tear of cam track, which also facilitates its easy replacement.

• Upper punch dust covers to avoid collection of dust on punch head.

Tablet rotary punch machine are designed with the following basic components:

Hopper: It is used to hold the materials (drug or the drug with excipients/granules) to be compressed and supply the material to the die and removes the tablet after its compression 

Dies: Dies defines the shape and the size of the tablet by allowing the lower and upper punch to come close together to compress the material.

Lower and upper punches: These are used for compressing of the materials (drug or the drug with excipients/granules) within the dies.

Cam track: This is the component used forguiding the movement of the punches.

Capacity regulator: To adjust the position of the lower punch to accommodate the required quantity of materials by the die.

Ejection regulator: To adjust the position of the lower punch, so that its highest position is at par with the surface of the die.

Driving wheel: It helps in the movement of the lower punch, the upper punch and hopper shoe and also check their movement.